Evaluación de la viabilidad del desarrollo de geopolímeros a partir de residuos de las industrias térmica, minera y cerámica
Archivos
NO SE HA AUTORIZADO la consulta de los documentos asociados
Fecha
2024-07-23
Autores
Título de la revista
ISSN de la revista
Título del volumen
Editor
Resumen
[es] La necesidad de la reducción de residuos acumulados asociados a diferentes industrias como las de los sectores minero, térmico y cerámico plantean la necesidad de su valorización mediante el desarrollo de nuevos materiales de construcción a partir del proceso de geopolimerización.
Por tanto, la presente investigación se centra en el estudio de la compatibilidad y la viabilidad
del precursor principal, los lodos de corte de pizarra (SSCS) en la conformación de geopolímeros
con otros precursores secundarios, metacaolín (MK) y chamota (CH), su activación alcalina mediante
activadores comerciales (Na2SiO3) y alternativos (cenizas de fondo de biomasa (BBA)) y la
influencia de la adición de fibras de PP. Para ello, se llevó a cabo una fase de caracterización de las materias primas empleadas, seguido de una fase de dosificación. Finalmente, se evaluaron las propiedades físicas y mecánicas de los geopolímeros conformados obteniendo prometedores resultados de resistencia a compresión.
[en] The need for the reduction of accumulated waste associated with different industries such as the mining, thermal and ceramic sectors raise the need for its valorization through the development of new construction materials from the process of geopolimerization. Therefore, the present research focuses on the study of the compatibility and viability of the main precursor, shale cutting sludge (SSCS) in the conformation of geopolimeters with other secondary precursors, metakaolin (MK) and chamotte (CH), its alkaline activation by commercial activators (Na2SiO3) and alternative (biomass bottom ash (BBA)) and the influence of the addition of PP fibres. For this, a characterization phase of the raw materials used was carried out, followed by a dosing phase. Finally, the physical and mechanical properties of the conformed geopolimeters were evaluated, obtaining promising results of compression resistance.
[en] The need for the reduction of accumulated waste associated with different industries such as the mining, thermal and ceramic sectors raise the need for its valorization through the development of new construction materials from the process of geopolimerization. Therefore, the present research focuses on the study of the compatibility and viability of the main precursor, shale cutting sludge (SSCS) in the conformation of geopolimeters with other secondary precursors, metakaolin (MK) and chamotte (CH), its alkaline activation by commercial activators (Na2SiO3) and alternative (biomass bottom ash (BBA)) and the influence of the addition of PP fibres. For this, a characterization phase of the raw materials used was carried out, followed by a dosing phase. Finally, the physical and mechanical properties of the conformed geopolimeters were evaluated, obtaining promising results of compression resistance.