DESARROLLO DE GEOPOLÍMEROS A PARTIR DE ESCORIAS DE FERROSILICIO
Archivos
NO SE HA AUTORIZADO la consulta de los documentos asociados
Fecha
2021-09-10
Autores
Título de la revista
ISSN de la revista
Título del volumen
Editor
Jaén: Universidad de Jaén
Resumen
El objetivo de este Trabajo Fin de Grado es la obtención de nuevos geopolímeros a temperatura ambiente
empleando escorias de ferrosilicio. Escorias de ferrosilicio y escorias de acero (10-40% en peso) se
emplearon como precursores de aluminosilicato y silicato de sodio y una disolución de hidróxido sódico
6 M como activador alcalino. Se han determinado las propiedades físicas, mecánicas y térmicas de los
materiales sostenibles activados alcalinamente a 7 y 28 días de curado. La investigación experimental
reveló que la adición de escoria de acero en los geopolímeros basados en escoria de ferrosilicio mejoró
su reactividad alcanzando una resistencia a la compresión de 13 MPa, con la adición del 50% de la escoria
de acero. La mejora de la resistencia mecánica puede atribuirse a la mejora de la reacción de
geopolimerización y a la mejora de la estructura del gel.
The goal of this Final Project is obtaining new geopolymers at room temperature by using ferrosilicon slag. Ferrosilicon slag and steel slag (10-40% in weight) were used as precursors of aluminusilicon and sodium silicate in a 6M dissolution of sodium hydroxide as an alkaline activator. Physical properties at 7 and 28 days of curing time have been determined. Experimental investigation revealed that the addition of steel slag in the ferrosilicon based geopolymers improved their reactivity reaching a compressive strength of 13 MPa, with the addition of 50% of steel slag. The improvement of mechanical strength can be attributed to the better reaction of geopolymerization and the better structure in the geopolymeric gel.
The goal of this Final Project is obtaining new geopolymers at room temperature by using ferrosilicon slag. Ferrosilicon slag and steel slag (10-40% in weight) were used as precursors of aluminusilicon and sodium silicate in a 6M dissolution of sodium hydroxide as an alkaline activator. Physical properties at 7 and 28 days of curing time have been determined. Experimental investigation revealed that the addition of steel slag in the ferrosilicon based geopolymers improved their reactivity reaching a compressive strength of 13 MPa, with the addition of 50% of steel slag. The improvement of mechanical strength can be attributed to the better reaction of geopolymerization and the better structure in the geopolymeric gel.