ANÁLISIS MECÁNICO DE PROBETAS IMPRESAS EN FDM MEDIANTE FIBRA DE VIDRIO CONTINUA
Fecha
2020-09-07
Autores
Título de la revista
ISSN de la revista
Título del volumen
Editor
Jaén: Universidad de Jaén
Resumen
Análisis de la respuesta mecánica de probetas impresas en 3D empleando una impresora Markforged Onyx
Series. Las probetas están formadas por una matriz de fibra de carbono y nylon y fueron reforzadas con fibra de
vidrio. Se establecieron dos grupos de ensayo, un grupo para ensayos a tracción y otro para ensayos a cortante,
donde se modificaron los parámetros de impresión de patrón de fibra y localización de fibra.
Analysis of the mechanical response of specimens printed in 3D using a Markforged Onyx Series printer. The specimens are made of a matrix of carbon fiber and nylon and were reinforced with fiberglass. Two test groups were established, one group for tensile test and the other for shear test, where the fiber pattern and fiber localization printing parameters were modified.
Analysis of the mechanical response of specimens printed in 3D using a Markforged Onyx Series printer. The specimens are made of a matrix of carbon fiber and nylon and were reinforced with fiberglass. Two test groups were established, one group for tensile test and the other for shear test, where the fiber pattern and fiber localization printing parameters were modified.