Incorporación de vidrio granulado en los materiales de construcción.
Archivos
NO SE HA AUTORIZADO la consulta de los documentos asociados
Fecha
2020-06-26
Autores
Título de la revista
ISSN de la revista
Título del volumen
Editor
Jaén: Universidad de Jaén
Resumen
El objetivo principal de este Trabajo Fin de Grado es evaluar el comportamiento del mortero cuando se utiliza vidrio
granulado como sustituto de los áridos.
Para evaluar como varían las propiedades, se han realizado distintas probetas con un contenido en vidrio del 0, 10, 20,
30, 40, 50, 75 y 100% y se han sometido a distintos ensayos. Algunas de las propiedades que se han determinado son su
densidad aparente, su coeficiente de absrción por capilaridad, su resistencia a flexión y compresión así como su
conductividad térmica.
Además de evaluar como influye el contenido de vidrio sobre la fabricación de mortero, se han estudiado la influencia de
dos tiempos de curado, 7 y 28 días.
The main objective of this End of Grade Work is to evaluate the behaviour of mortar when using granulated glass as a substitute for aggregates. In order to assess how the properties vary, different test pieces with a glass content of 0, 10, 20, 30, 40, 50, 75 and 100% have been made and subjected to different tests. Some of the properties that have been determined are their bulk density, their absortion coefficient by capillarity, their resistance to bending and compression as well as their thermal conductivity. In addition to assessing how the glass content influences mortar production, the influence of two curing times, 7 and 28 days, has been studied.
The main objective of this End of Grade Work is to evaluate the behaviour of mortar when using granulated glass as a substitute for aggregates. In order to assess how the properties vary, different test pieces with a glass content of 0, 10, 20, 30, 40, 50, 75 and 100% have been made and subjected to different tests. Some of the properties that have been determined are their bulk density, their absortion coefficient by capillarity, their resistance to bending and compression as well as their thermal conductivity. In addition to assessing how the glass content influences mortar production, the influence of two curing times, 7 and 28 days, has been studied.